Langir 10mm Push Button Switch

If you are looking for tiny push button switch, Langir will be your number 1 choice.

10mm push button switch is quite small, but it also can be made with ring illuminated, certainly you can choose non-illumination. For 10mm pushbutton switch, the diameter for the head is only 6.5mm, thus it only accepts high flat head. High flat head will be easier to push on or push off and your finger will not be hurt.

Langir 10mm push button switch can reach 250vac voltage with the current 0.5A. It has momentary 1NO1NC and latching 1NO1NC. With led 6v, 12v, 24v, 36v, the resistor is already installed inside the switch, for other led voltage, we have to connect the external resistor in order to prevent it from being burned out.

At present, Langir 10mm push button switch crust is only stainless steel material. For other materials, we accept customization but the minimum order quantity is over 500pcs.

If your device is really limited by size, our waterproof ip65 momentary mini push button switch will be your good choice. It will be perfectly installed in your device with good function.

As a leading manufacturer of Anti-Vandal Switch, Langir has already developed over 90% new switches in markets. We are also able to assist you in developing a specific switch for your local markets. Contact us now for a quick quote!

10mm Push Button Switch – FAQ Guide

In this guide, you will be introduced to the 10mm push button switch and learn a lot of substantial information about it.

You will find out about its important features that you may not expect from a 12v 4 pin momentary mini led push button switch.

Aside from that, you will also learn the wiring configurations you can use as your reference during the push button switch installation process.

Furthermore, you will learn about its several application ideas that may inspire you to do the same in the future.

Continue reading this guide to get more information about this small but amazing switch so you can decide on the appropriate options for your application.

1. What is the 10mm push button switch?

This switch is one of the many types of small push button switches. Even if it is small, it is still a competitive electrical mechanism that can perform many of the common push button switch’s functions.

However, you may not be able to find many designs or selections but you can always consult your manufacturer for your options.

But for sure, you can find high quality momentary mini push button switches that will suit your application requirements.

2. How did the 10mm push button switch started?

Many of the kind of switches that we see in the market today have similar components to the earlier versions of the push button switches.

Nothing much has changed with the internal components and how they work.

But what has dramatically changed are the designs and the quality of the push button switches.

Unlike before when the options are less and quite restricted, now you can have the illuminated types of switches with different button shapes or designs.

Fun fact: Before the toggle light switches, push button light switches dominated millions of households.

Until today, there are old houses that still have working vintage push button light switches.

In the 19th century, issues with the push button switch’s actuator getting stuck is well-known.

And this is highly likely the reason why the push button light switch somehow declined in popularity and the toggle light switch took over.

However, while it is not as much used for light switches today, push button switches became famous for other applications such as switches for small appliances and many types of control panels.

Aside from its everyday use, they are also used for significant purposes such as switches for the automotive, pilot cockpit, aerospace controls, and many more.

Antique push button light switch in the hallway

3. Does the 10mm push button switch have many applications?

Although 10mm push button is smaller when compared to the other push button switches, it does not fall behind when it comes to serving a wide array of applications.

It is even the perfect choice if you are planning to work on small devices, equipment, or any small electrical projects.

You can also mount on an uneven surface since it will only occupy a small area.

It has a smaller diameter which will not leave visible gaps between the actuator and the surface where it is installed.

It is a small wonder as it has the same capacity and features as the other push button switches so you can surely find the one that you need for your home or your business.

4. What are the dimension sizes of a 10mm push button switch?

The dimensions of a 10mm push button switch depend on its type.

But you can take a standard the type with a high flat head for example.

On average, this type would have around 0.96 inches or 24.5 mm in total length.

While it is around 0.53 inches or 13.5 mm in diameter when measuring the push button switch’s head from one edge to the other.

The distance between the two terminals would be around 0.25 inches or 6.50 mm apart.

端子厚度约为0.02英寸或0.50毫米。.

10毫米指示灯示例尺寸

5. 能否请求配置10毫米按钮开关？

是的，您可以要求对您的10毫米按钮开关进行修改。.

然而，这取决于制造商。.

此外，由于按钮开关尺寸较小，您在修改或定制方面可能没有太多选择。.

但您始终可以与制造商协调您所需的修改。.

7. 10毫米按钮开关是否易于使用？

是的，10毫米开关虽小但易于使用。.

首先，激活开关所需的按压力较小。.

它们可适应任何空间，在面板可用面积有限时尤为理想。.

最后，它们也易于维护，因为无需频繁清洁，且可存放在小盒子或容器中。.

8. 10毫米按钮开关是否耐用？

是的，存在高质量且耐用的10毫米按钮开关，甚至能承受故意损坏。.

因此它们可安装在户外或供公众日常使用。.

其使用寿命可达1,000,000次机械寿命周期和200,000次电气寿命周期。.

请务必选择高质量的按钮开关以确保更长的使用寿命，而非选择可能性能不佳且不耐用的廉价版本。.

9. 10毫米按钮开关会自动复位吗？

这取决于按钮开关的类型。.

若是瞬时型，10毫米瞬时开关会自动复位至常态。.

而对于自锁型，需再次按压按钮才能使其恢复常态。.

例如通断型开关（也称为基本型开关）。.

您可以找到 reset push button switch 专门设计适用于您应用的型号。.

由于此类是按钮开关的常见类型之一，在线或实体店均不难找到。.

复位按钮项目

10. 10毫米按钮开关的接线说明是什么？

对于简单的通断开关，通常只有两个端子，分别对应正极和负极导线。.

但如果10毫米按钮开关有四个端子，制造商会指导您各端子的用途。.

通常每个端子附近会标注其用途，或提供示意图。.

您将看到以下标识：

• (+) 或正极符号 = LED环形灯
• (-) 或负极符号 = LED环形灯
• C = 公共触点
• NC = 常闭触点（按压断开）
• NO = 常开触点（按压闭合）

接线4针按钮开关时，建议使用彩色编码导线以便识别接线来源。.

例如：

• (+) = 红色导线
• (-) = 黑色导线
• C = 绿色导线
• NC = 黄色导线
• NO = 蓝色导线

以下是10毫米按钮开关的接线步骤：

• 将所有导线两端剥去约1英寸绝缘层以露出内部线芯。.
• 将红色导线裸露端插入正极端子孔。.
• 推入导线至绝缘部分并拧紧。.
• 在1-2秒内完成焊接，使导线牢固连接端子。.
• 随后按上述颜色编码建议连接其余导线。.

按钮开关基本接线图

11. 如何连接10毫米按钮开关使其仅在按压时亮灯？

沿用前例，可将蓝色导线与红色导线连接，再将合并后的导线接至设备正极。.

随后将绿色导线连接电源正极引脚，黑色导线连接电源负极引脚及设备负极。.

12. 能否将10毫米按钮开关接成LED在关闭时仍保持亮灯？

是的，可将10毫米按钮开关接线配置为即使开关关闭时LED仍保持亮起。.

通常制造商会提供接线图及可能的端子配置方案。.

您可参照以下彩色编码导线指南进行接线：

• 将蓝色导线连接至设备(+)极。.
• 将红色与绿色导线连接在一起。.
• 将合并的红绿导线连接至电源(+)极。.
• 最后将黑色导线连接至电源(-)极及设备(-)极。.

LED常亮基本电路图

13. 10毫米按钮开关能否安装在船舶控制器上？

可以，但需选用具有防水或防溅特性的型号，以确保其使用寿命长且即使手指潮湿时按压仍安全。.

建议寻找IP65防护等级的产品，这表示其可防溅水。.

然而，若存在水流喷射或浸水可能性，防护等级必须更高。.

防水保护的最高等级为IP69K。.

拖船的驾驶台控制装置

14. 10毫米按钮开关是否需要继电器？

这取决于按钮开关的额定电流。.

若电源电流超过其额定值，则需加装继电器。.

否则，直接选用额定值等于或高于电源规格的按钮开关即可。.

制造商不会建议提供超过10毫米按钮开关承载能力的电流额定值。.

若开关通以强电流，可能短期内仍可工作，但会发热且触点最终将烧毁。.

这可能被视为不当使用，且可能不在保修范围内。.

若确实无法避免此情况，可连接继电器或直接选择具有相同或更高额定电流的开关类型。.

15. 10毫米按钮开关能承受的最大电流是多少？

10毫米按钮开关能承受的最大电流取决于其额定参数。.

若其额定值为5瓦特、2.5伏特，这些数值可换算为2安培。.

这意味着该开关最多可承受2安培电流。.

请参考以下示例值及计算按钮开关最大电流的公式：

功率：40瓦特

电压：13.33伏特

用于计算电流的公式为：

电流（安培）= 功率（瓦特）

电压（伏特）

电流（安培）= 40瓦特

13.33伏特

计算结果为3.00安培，表明该开关最多可处理3安培电流。.

16. 10毫米按钮开关可安装的最大材料厚度是多少？

10毫米按钮开关的长度不及其他按钮开关，因此无需过厚的安装材料。.

大多数制造商建议面板厚度约为4毫米，最大可能为5毫米。.

这是为了确保六角螺母能沿螺纹充分拧紧，从而牢固安装按钮开关。.

17. 10毫米按钮开关能否替换排气开关？

可以。但排气开关的接线可能具有一定挑战性。.

可能需要学习一些线束技能才能正确连接至排气系统。.

正确连接后，通常可保持按钮关闭以使用常规排气，按下按钮则可启动强力排气。.

或者，可咨询电工处理排气系统，以避免错误接线导致故障。.

排气扇控制开关

18. 10毫米按钮开关的按钮尺寸多大？

10毫米按钮开关的按钮或执行器不大于普通拇指指甲尺寸，约6.55毫米。.

按钮尺寸与拇指匹配，因为拇指是人手五指中最大的。.

这确保了按压按钮不会有困难，任何手指均可轻松操作。.

若按压平头10毫米按钮开关有困难，可选择高平头或凸头按钮开关，更易按压且避免手指受伤。.

19. 10毫米按钮开关需要多粗多长的电线？

部分制造商随10毫米按钮开关附赠电线。.

这些电线长度可能为15厘米或更长。.

线规至少约为17 AWG，若无此规格，可尝试使用18 AWG。.

17 AWG电线

20. 10毫米按钮开关能否用于泵送挡风玻璃清洗液？

可以用于此目的。.

但应选择10毫米瞬时按钮类型，而非通断开关。.

这意味着仅当执行器被按下时才会泵送清洗液，松开即停止泵送。.

21. 10毫米按钮开关是否适用于汽车领域？

是的，10毫米按钮开关可用于 汽车开关 例如喇叭按钮及其他车载按钮开关。.

也可用作车辆灯光开关，但这取决于具体控制的灯光类型。.

多数情况下，车辆安装需配备继电器以确保稳定电力供应，避免灯光闪烁或变暗。.

带按钮开关的定制汽车仪表盘

22. 若朝上安装，水会进入10毫米按钮开关吗？

对于防水型10毫米按钮开关，通常具有密封设计以防止进水。.

但标准型按钮开关则不同，可能需要购买开关护罩进行保护。.

可向制造商确认按钮开关的防水特性，或直接查看其IP防护等级。.

10毫米按钮开关护罩

23. 10毫米按钮开关是否有软触类型？

一般而言，软触按钮开关采用塑料头，可能不适用于高频率应用场景。.

应选择 Stainless steel 10mm push button switch If you are looking for better quality and durability.

Soft-touch push button switch application on portable gaming device

24. Can a 10mm push button switch be used for DC?

Yes, since there are 10mm push button switches that can handle either AC or DC type of current.

You will be able to find this information on the product specification information available on the manufacturer’s website or any online marketplace.

25. How long are the blade connectors of a 10mm push button switch?

Its blade connectors or terminals are small in length.

Typically, they measure around 0.13 inches or 3.40 mm.

Push button switch blade connectors or terminals

26. Will the 10mm push button switch’s connectors melt when soldered?

The terminals of the 10mm push button switch are small and a bit fragile that you may find soldering them a hit or miss.

You can sometimes find some soldering instructions included in the push button switch’s package.

But in case that this is not available, try to start with a lower soldering wattage and solder one terminal within 2-3 seconds.

You may also consider using a fine tip soldering gun for precise welding and prevent it from touching and melting the enclosure.

Soldering the terminals is done lightly without applying too much pressure otherwise they may bend or melt.

The push button switch should be on its default status meaning it should not be turned on when soldering the terminals.

Illustration of proper soldering technique

27. Can a 10mm push button switch be crimped instead of solder?

This will depend on the type of the 10mm push button switch.

If it’s the soldered type, the terminals are not designed to be crimped but should be soldered.

The terminals may be too short for crimping and they may not hold on for long.

Different types of crimp connections

28. Can a 10mm push button switch tolerate vibration?

Some types of 10mm push button switches are made from metal shells that can tolerate vibrations.

The strong enclosure serves as a solid housing to prevent the internal components from breaking apart.

They are also known as Anti-vandal push button switches And would have IK10 rating which means that it has a high level of enclosure protection.

They can also be used in tough environments such as factories and public places.

Tram train push button controls

29. Can you still see the LED light of a 10mm push button switch under direct sunlight?

Yes, you can see them even under direct sunlight.

Especially when the 10mm push button switch has a higher current rating which means the LED would have a higher current flow as well.

This enables the LED to light up brighter and would still be visible even when installed outside.

30. Can a 10mm push button switch be used for a home table lamp switch?

Yes, it is a good idea to use a 10mm push button switch for a home table lamp switch.

It will work perfectly using an on and off push button switch type.

The small size is also compatible with the scale of the table lamp as it is not too big for it.

You can also opt to choose the LED type, so when the table lamp is turned off, you can see the bright push button switch even in the dark.

Desk lamp with 10mm push button switch

31. What is the thread depth of a 10mm push button switch?

The thread depth of a 10mm push button switch is around .362 inches.

Some people ask for this information as they plan to place the push button switch inside a tube.

There are PVC tubes that have inside grooves in which a 10mm push button switch can be inserted.

The inside grooves of the tube will match the thread of the push button switch for a secure fitting.

Push button switch with visible thread depth

32. What are the rated amperages of a 10mm push button switch?

Depending on the manufacturer, you will find 10mm push button switches with low or high amperage ratings.

The majority of them would have either 3 Amps or 5 Amps.

You will be able to find this information on the product specifications of your chosen push button switch.

You can also refer to its datasheet, for example, the mini push button switch datasheet.

Or you can inquire about this with the manufacturer before making a purchase.

33. Will a 10mm push button switch work on a motorcycle starter button?

When installing the 10mm push button switch as a replacement for the starter button of a motorcycle, it should be wired following the wirings of the previous button.

Or at least connected to the solenoid and not directly connected to the motor that starts it.

Connecting it straight to the starter motor may work for a short period but may fail due to arcing or too much power supply.

Push button switch on motorbike ignition

34. Can a 10mm push button switch replace an old garage door opener buttons?

Yes, you can definitely use it to replace the buttons to open your garage door.

But before that there are just a couple of things to bear in mind:

• If the power supply is higher than the switch’s voltage, add a relay.
• Follow the hole diameter which is 10mm.

Push button switch on garage door controls

35. What is the actuation force for a 10mm push button switch?

The pressure needed to actuate this switch is around 4N.

This is similar to the force you use when pressing the keys of a keyboard.

And this means that the actuator of the 10mm push button switch does not require much force to press and activate.

36. Can the 10mm push button switch be used for a reset or reboot switch?

Yes, they are good for reset and reboot switches since they are small in size.

You will need to select an SPST or normally closed switch either SPDT which would have both NO and NC terminals.

37. Can a 10mm push button switch handle a mains power?

Unfortunately, you will need to add a relay since the mains power supply would be too high for the 10mm push button switch to handle.

Otherwise, you can opt to find big current push button switches that are designed to handle and manage high power supply.

38. Will the 10mm push button switch work on a guitar kill switch?

Yes, you can find a 10mm push button switch that is an on and off type to work as a guitar kill switch.

Electric guitar push button switch application

39. Is the LED 10mm push button switch duller if it has low voltage?

Typically, when a push button switch has a lower current rating, the LED will be less bright and may have a shade duller.

However, there are push button switches that have better LED quality even when supplied with low voltage only.

If you prefer to have the LED emit just enough brightness, you can verify its current rating and the switch’s voltage rating as well.

When you supply the suggested voltage rating, you will notice the difference in the LED’s brightness.

40. Can you control the LED 10mm push button’s brightness?

If you think that the LED is too bright, you may add an ohm resistor and connect it with the LED wire or positive terminal.

But you can also try to look for a 10mm push button switch with a lower voltage instead.

There are also non-illuminated options if you decide that there’s no need for the LED.

Arcade with bright push button switches

41. Why does the LED in the 10mm push button switch fade out when being turned off?

If you notice that when you turn off the push button switch, the LED seems to fade out instead of going off instantly, there’s no need to worry.

Modern LED push button switches would have a capacitor system inside them that would slowly discharge to avoid burning the LED on the next time you switch it on.

However, if you think that the LED switch functions abnormally, you can consult your manufacturer to verify if the push button switch needs repair or replacement.

42. What are the LED voltages available for 10mm push button switches?

The available LED voltages of a 10mm push button switch rely on the type of switch and what the manufacturer can provide their customers.

Some manufacturers can offer you several options such as 3 volts, 6 volts, 12 volts, 24 volts, and 36 volts for the LED.

Other voltage ratings beyond the ones mentioned may need an external resistor to avoid the LED from burning out.

There are manufacturers which have fewer choices for the LED voltage options.

It may not be as important as the push button switch voltage but the quality of the LED can be better when supplied with higher voltage.

You may also want to consider the application you would like to use the push button switch for.

For example, if you’re planning to use the 10mm push button switch for automotive switches, you may need around 12 volts powered LED to get a brighter light inside the car even during daylight.

Push button switch car modification

43. Does a 10mm push button switch have a built-in resistor?

Usually, a 10mm push button switch with LED has a built-in resistor inside it.

If the push button switch has a current rating of 5 A, it could have a resistor with 680 Ω which imposes no issues when it is used for a 12 volts power supply.

There’s no need to add any resistor unless the power supply has a higher current rating.

44. Can a 10mm push button switch be wired for an NC circuit?

Yes, you can wire the 10mm push button switch for an NC circuit and even for a NO circuit.

You will notice the NO and NC labeled on the terminals of the switch which means that it can be used for both circuits whichever you prefer best.

45. Does a 10mm push button switch have a push and hold type?

Yes, the 10mm push button switch has a push and hold type or also known as the momentary type.

This is great for operations such as door buzzers or doorbells, call buttons, roller doors, and many others.

The momentary type of push button switch can be the normally open or normally closed switch.

46. Does a 10mm push button switch have less contact resistance?

The contact resistance of a 10mm push button switch is generally less than or equal to 50 ohms.

It is not based on the size of the switch as the other bigger push button switches would have the same contact resistance.

47. Can you wire the 10mm push button switch where the light and switch are independent?

是的，可以实现。.

The terminals (+) and (-) are for the light whereas C, NO, NC are for the switch.

They can be wired separately and you can wire them in whichever combination you prefer.

48. Can you use the 10mm push button switch as a signal switch?

Yes, if the push button switch has momentary or NO and NC contacts.

You can combine NC and C for the push-to-break function where it is connected normally and when you press, it disconnects.

Then the NO and C will be the opposite, it is normally disconnected and it connects when you press the button.

Mounting illustration of push button switch

49. Where do you position the O ring and the nut of a 10mm push button switch?

Before mounting the push button switch to the panel, first, you need to insert the O ring from the terminal’s end and then position it firmly below the push button’s head.

Then insert the push button switch through the mounting hole.

然后通过位于面板后方的按钮开关另一端拧紧螺母。.

O型圈将按钮开关密封在面板上以防止进水，而螺母则起到固定作用。.

50. 10毫米按钮开关能否安装在胶合板上？

10毫米按钮开关从执行器下方到接线端子末端的长度大约为0.496英寸或12.59毫米。.

最薄的胶合板厚度约为0.11英寸或3毫米。.

大多数制造商建议面板厚度约为4毫米至5毫米。.

3毫米厚的胶合板稍薄，可能在后续安装按钮开关时引发问题。.

然而，通过开槽切割减薄胶合板可以解决此问题。.

或者更好的方法是，购买厚度合适的面板，以便顺利安装10毫米按钮开关。.

胶合板厚度

51. 10毫米按钮开关是否适用于高功率电路？

高功率电路可能超出10毫米按钮开关的承载能力。.

为安全起见，最好选择具有高额定电流的按钮开关类型，因为处理高功率可能存在危险。.

您也可以咨询持证电工为您进行安装。.

52. 10毫米按钮开关的按键行程是多少？

通常，这取决于您拥有的按钮开关类型。.

由于10毫米按钮开关直径较小，可供选择的执行器头部类型有限。.

市场上最常见的是穹顶头、平头或高平头类型。.

通常，按下10毫米按钮开关的执行器时，其行程距外壳边缘深度约为2-3毫米。.

然而，高平头执行器在按下时按键会保持水平。.

53. 10毫米按钮开关能否用作急停开关？

遗憾的是，10毫米按钮开关尺寸过小，无法满足急停按钮开关的标准要求。.

为此您需要寻找至少22毫米的按钮开关。.

急停按钮开关 需要易于识别和定位，以便在紧急情况发生时能够立即识别并按下按钮。.

而10毫米按钮开关相较于大型开关可能不够醒目，且尺寸过小不易定位。.

急停按钮

54. 10毫米按钮开关是否附带接线，还是需要单独订购？

遗憾的是，并非所有制造商都会提供按钮开关所需的电线。.

但您可以在下单前核实此信息。.

大多数情况下，包装清单会明确说明是否包含接线。.

如不包含，您可以单独订购或选择开关连接器，从而无需焊接。.